I decided to join team Paradise Fibers, as I mentioned last post. Due to this, I have spend the past weekend preparing my fibers to start spinning on the 3rd.
I spent September 20th preparing the locks, flicking open ends, carding a few rolags, creating some cloud fiber. The spin should be tons of fun, I even found some white and black mohair locks to add even more texture. I’m debating if I want to ply this with a sequined thread I have or just leave it as a wild singles. I’ll see how it looks on the 3rd after I spin it. Right now I plan on spinning this on the 3rd so that I have the rest of the week to get as much mileage as I can.
I also took each piece of roving that I planned on using for this spin and split them in half so that I could have an approximately equal spin on two different bobbins. Using a basket and a bag I kept the two halves of the spin separated, but I also pulled off pieces of each main roving into 4-10 inch segments. After I had the fiber divided, I also added in some different colors that went with the theme, I rolled each section of roving into a little nugget. This will make it easier for me to pick out a random nugget of fiber to spin from. I also put a bobbin in each container, these combined with the one on the wheel give me two to ply from and one to ply onto.
I am super excited for this spin, it has actually given me to motivation to ply up some singles I have had resting on my weaving bobbins, but that is a spin for a different post.
Until next time remember to live life A Little More Abstract!
I really enjoyed taking the sock fiber from the February Paradise Fibers box and using coffee to dye it. I will have to wait until I can get a good photograph outside, because the color does not show very well at all in this photo. It was so much fun saving the grounds from my k-cups and turning them into a great fiber to spin. Should I decide to overdye this, the brown as a base will add a lot of depth to the new color. I cannot wait to spin this, but I have a couple of projects before I can get to this one.
Speaking of Spinning Projects I have made progress on my spin for a pair of anklettos/wristlettos. Using the Ezee Twist tool I managed to spin my yarn at about 16wpi singles which should be 8 wpi 2-ply yarn. I finished off the singles, they are currently resting.
I have also signed up to take part in the Paradise Fibers Spinlympics again this year, even though there are no winter olympics. I already had a grab bag of the merino fiber that they recommend using, I have carded up the yellow, orange, and blues with some silk I had around and made rolags. I hope to start spinning this since the spinlympics are ending by the end of February. This will put me, although I am already, behind on spinning for my hap. That is supposed to be knit up by the middle of March. I don’t think I will make the deadline, but I certainly hope to have the spinning done for that by then. I do not have any photos of my Spinlympics rolags nor my Hap rolags, so we will have to skip to sock progress.
I have the first two socks made from the pattern in Interweave Crochet 2011. I did not do any extra shaping around the ankle in the blue worsted weight yarn sock. However for the multi-colored fingering weight sock I added a few decreases before I turned for the heel. This causes the sock to be a much better fit around my ankle. Since I used the same size hook for both the fingering weight yarn is a looser fabric than the worsted, this will result in a sock that will wear out faster, but I have already noticed that the fingering weight sock breathes better on my foot. Right when I finished the fingering weight sock I started on the second sock. I am not too worried about the worsted weight one, but I really do want to have a pair of socks in this fingering weight yarn. I had also purchased two skeins of Felici in the Baker Street colorway from knitpicks. I adore the BBC show Sherlock (though I hate Mary) and so I had to have these Sherlock inspired socks. I went down a size in my crochet hook, and I am also making the ribbing a bit longer than previously. I have tried the cuff on, and 36 stitches should still be the right amount. I am very excited to see how these are going to turn out!
That is all of my progress for now, Happy Crafting!
Okay, so I actually didn’t show you the rolags I have been making throughout September in Preparation for Spinzilla. From left to right, top to bottom, we have:
Paradise Fibers Scarlet ‘n’ Silk, a 50/50 merino tussah blend. This should spin up beautifully, I hope to hit a sport to worsted when I am done.
Ashland Bay Moorit- I think this is considered a heritage breed, I am looking forward to seeing how it spins from a rolag. I have a lot of trouble spinning some of these from top and hope that the change in prep will help.
Yak Silk Blend from Paradise Fibers- I love Paradise fibers, but they try and get me out of my comfort zone quite a bit. I have been terrified of this blend ever since I received it. So I decided to get out of my comfort zone and turn these into rolags to spin up. Wish me luck!
Allegheny Fiber Arts, they have an etsy store. This is from a lovely young woman that belongs to the weaving and spinning guild that I do out of Bradford, PA. I love her fibers, I had previously purchased a roving that she called Mango and it spun up beautifully. Now I have this batch, I forget what she called it but the colors are so perfect for an autumn spin I could not resist. (Though I did add sparkle when I carded it, I am a sucker for sparkle).
I also created a few batts, but I think I will wait and show those as I spin them.
Wish me luck! Happy Crafting, and Happy Spinzilla!
For the August Fiber of the Month Club we were sent some beautiful fibers and Nepps to work with. If you do not know, nepps are ususally bits of fiber that were caught in the teeth of the drum carder and became little wool balls. Sometimes these are the weak tips, or if the fleece was too fine for the kind of carder you have it will result in nepps. In this case it looks as though it were little felted wool balls dyed to go with this box. They are a really pretty rainbow of colors and I was sort of excited to get them. I sorted them out by color and used some of the little bits and some Perendale Wool I had to create little rolags to spin woolen for a fine, light, colorful yarn.
Nepps went everywhere. I had not used a large amount to begin with, but what I did have went everywhere leaving few in the yarn.
I was undaunted, okay, I was a little daunted. However I decided to persevere. I used my drum carder and some Corriedale wool I had. I put down a layer of Corriedale, then some nepps sandwiched under some Wool, and I kept going. This resulted in a very pretty batt.
I then proceeded to spin this into a thicker yarn. The resulting yarn was neat and textured, but there were still a ton of nepps everywhere. When I plied even more nepps flew off, and when I washed the resulting skein even more nepps wound up flying everywhere. I sort of like how the skein turned out, but I really want to be able to spin a finer yarn with the nepps (I will probably never do anything with the bulky yarn).
I look forward to continuing this journey and seeing where I am taken. I will keep you posted as I learn more about how to use nepps in spinning. Until then, Happy Crafting!
Due to the time consuming nature of cleaning these bags of alpaca I have decided to give Tour De Fleece a miss this year. This is an event that lasts as long as the Tour de France and involves challenges, rest days, and more just as the bicycling event. More than that it involves spinning everyday. While that is an overarching goal of mine, I would also like to focus on ensuring that I have this alpaca clean and ready to spin for the fall and winter. During these warm days as well as these rainy days I hope to take advantage of the weather, setting the fleece out on my brand new sweater racks while it is raining to wash them in a natural way, as well as setting them out in the sun to make sure that they are as dry as possible before I begin the next step in processing them. I am also hoping to comb or card out the fleeces before the snow comes, this will allow me to dispose of the fluff I cannot use in an eco-friendly way. Putting it out to be used as lining for animal homes or to decompose as mulch.
Flicking open the locks where I am able to and carding what does not flick is a time consuming process. For some of the coarsest seconds I attempted to turn the fur into batts, I managed to get three batts done, but I do not know if they will spin up very well. I plan on trying to spin them in a regular manner and if that does not seem to work, core spinning them. If it turns out that I hate spinning these batts, I do plan on gifting them to whomever wants them from my Guild. I hope to do this before my next batch of fleece is dry, that way I will know if this is a viable option for preparation.
That may have to wait though, I am currently spinning my June Box from Paradise Fibers, I am spinning the last third of those singles. The first two are pictured below.
My original intention was to ply the three bobbins together, however it is possible that they will be too muddy when I am done. Because of this concerns I will probably do a test sample to knit up, once I decide if I like that or not I will either ply all of them together or spin up a white single to ply with these.
Using my Brother Drum Carder and my Howard Hand Cards I managed to create a really amazing set of fiber preparations. The rolags at the left are from my handcards, I really like how they turned out. The middle was carded as a striped batt on my drum carder, I put it through the carder once and added a lot of sparkle that is not showing up here.
The single color batts were put through the drum carder once, again with a lot of sparkle added. The final batt looks red on one side, purple on the other, and has every color in between (along with a ton of sparkle). I tried to show the colors using the spots where I ‘nibbled’ it off of my drum carder, but they don’t show too well.
I am really looking forward to spinning each of these yarns and then plying them to make an amazing 3 ply yarn.
I am getting myself psyched up for the Paradise Fibers Spin Along for the Olympics as well as Ravelry’s Ravellenics. For the spin along I purchased the Brights package from Paradise Fibers, it contained a rainbow of colors as well as three other shades off of primary, burgundy, a blue, and a fluorescent pink. I didn’t think that these colors would do much but I wanted to card them with some sparkle anyway. I loaded my handcards, and away I went.
I tried going for a bit of a striped effect but soon discovered that I liked how everything looked when it was blended more thoroughly. I decided to create punis from my carding, since they are so much fun to spin, and I really hope that when I spin them they create an amazing tweed effect.
I decided, rather whimsically, to name them “Unicorn Fluff & Faerie Dust”. They have a lot more sparkle to them in person than they do in this photo.
As for the primary colors, I will make that into another post when I have pictures. I am very happy with how that turned out also.
As for the breed study, Heaven Help Me, I’ve decided to get a bit organized with it. I managed to spin and knit 13 different breeds in January. As stated in a previous post, I need to take more time with them. Unfortuantely for my resolve to move onto something different until I find out what my guild is doing, Camaj Fiber Arts is selling Perenale Wool for $1 an ounce as their wool of the month (which might be different by the time you are reading this post). So I have decided to look through the Field Guide to Fleece by Deborah Robson and Carol Ekarius to see what breeds I’m missing, which I already know are 90+. This should be a blast to work through, and since I have created a spreadsheet I hope to minimize my duplication of effort. In other words, I hope I’m not going to buy a bunch of breeds I’ve already spun, lol. Back to listing breeds. Later this week, or early next, I hope to post pictures of the pages I’ve already finished.
There are a lot of resources out there for learning how best to use a drum carder, these past three articles are a great resource for introducing a lot of the concepts involved in drum carding. This blog is probably a good one to follow also.
With this article, I especially liked the tip where the author says to hand card some of your smaller bits of fiber first to spread it out a bit more. I had never thought of that before, but it makes perfect sense to keep things thin and even.
I had a similar experience recently with a beautiful hand dyed top I picked up from a local dyer. I wanted to create a striped batt by separating out the yellow from orange from red. The colors blended a bit more than I thought I wanted, but the end result is two fantastic batts, with sparkle (I like sparkle so I added sparkle), that I plan on spinning separately and then plying together. As soon as I am done enjoying the fluffiness that is their batt form.
Happy Crafting, and read this article. Short but sweet!
I love the newsletters I get from Strauch Fiber Equipment. They always lead me to such wonderful places. In this case the article points out, in a very quick way, a method of adding in extra materials into a batt, that goes through a drum carder, without getting extra things stuck in the drum carder. Great article!