I have made some progress in warping up my loom. The threads are all through the front reed, I know that the weave is unbalanced because I did not measure it to begin with. At present I am working on getting all of the threads through the heddles in a twill pattern, straight 1-16 then 1-16 again. At the time of writing this I think I have the first 50 threads through heddles, wish me luck getting the rest set up.
This is not the only craft I have going on, is it ever just one craft? I have also been taking part of the Stitch Camp through TextileArtist.org. This is quite a bit of fun, and since it only takes about 30 minutes a day, lasting just 5 days, I find it to be a reasonable goal to maintain. The first step is to use a limited palette of 3 colors and make marks on your lightest fabric, then cut them apart, reassemble in a way that you like, and now on the third day I added in some stitching. I am not certain if I am finished stitching or if I will give it a little more jazz.
You didn’t think I was done did you? Two projects, pfft. I am also working on a pair of quilts. One was discovered when a friend of mine wanted me to make them rice packs was looking for the skull fabric I had mentioned. The other quilt I am working on turning into a tactile quilt or fidget quilt for the father of a friend of mine, he is having trouble with ‘Sundowner’s’ in the facility he is currently living. For the Halloween Quilt I need to add a label, since I was unable to catch one border in the binding of my quilt. For the Fidget Quilt I need to redo a couple of small sections of quilting, I had caught the side of the backing in the quilting, so I had to pick out the quilting. Once I have the quilting done I need to carefully trim the batting, and turn the backing over to bind the quilt. If I can get away with not having to trim the edges of the quilt and make a traditional binding I am going to take that and run with it.
For the fidget quilt I have added on a rough ribbon, soft fleece, and a changeable sequin patch. The sequin patch, much to my shock, was easy enough to sew on and did not break a needle.
Okay, that is it for today. I hope to have an actual update ready for you on Sunday, but until then Live Life a Little More Abstract
**** Will denote the crafty updates, house content until then. Today the person buying the house I grew up in will be doing their final walk through. The sale should be finalized tomorrow, with the disbursements happening from there. I hope that this means I can finally get myself settled on a budget that I can stick to. Of course, it is Holy Week (if you’re Catholic…which I am but lapsed), so things are going to be a little strange anyway. Even though it is a religious holiday the secular world seems to come to a bit of a slow down anyway. I did look into the roof grant, only to be told that they were working on finalizing the application and they would have the forms ready in about 90 days…well I’ve needed something done since October so waiting until June/July to fill out an application that could cover 3/4 the cost of it…doesn’t seem like a bad idea at this point in time. When I get someone in to look at the bathroom I imagine I can ask them about the roof as well.
I did start back onto Nutrisystem, only for my monthly concerns to rear their head setting my plans back for a few days. After tomorrow I should be able to go back to my original plan. I am debating if I want to spend my 3 day weekend next week hiding or if I want to go to the buffet next Sunday since I believe they will have lamb, I Love lamb, and don’t want to buy/cook/clean up after cooking lamb this week. Either way I hope to spend at least part of next weekend planting my seedlings in the pots I will use to put them outside in. Yay! I was going to pot the plants this weekend but did not, and I don’t feel bad about that. I need to rest for a couple of days, maybe finish some projects so I’m ready to start some new ones when I am back on an upswing. I have not been to the gym this week, Friday the weather was miserable and I was starting to feel poorly, then Saturday I started to figure out why I was feeling poorly, then today I had work and there was snow on the car so…no. I know it is weird, however I do not plan on going to the gym on days where there is snow, at least not when I am on a tighter schedule. If the weather is warmer and the gym is open at least 3 hours before I have to be at work that will work, 2 hours for the gym (getting there, working out, getting back) and 1 hour to clean up for work, then I will go to the gym. If not, then my iron and cutting board are upstairs, my sewing machine is downstairs, If I feel really good I’ll go up and down my stairs for 10 minutes at a time, that got me sweating the last time I tried that.
I took Friday and Saturday off, though I am working my other job today. I had made a ‘play date’ with a friend and former colleague to try out a solar dyeing technique, unfortunately the weather did not hold out, however we had a fun time anyway. She had some fabric she did not want to keep and offered it to me, one was a set of 5″ squares pre-sewn together into 4 patches. She told me that it might be good for a disappearing 4 patch, however I know I cannot machine sew the corners properly, no matter how much I try, so I believe I am going to edge the squares using a solid color and either make it into a baby quilt that I can practice my hand quilting on or as a pillow or something similar. She was also kind enough to gift me with a mat for my sewing machine to sit on with pockets in the front and her husband gifted me with a carved bunny that I will treasure. She has this upcoming week off and would like to show me to a quilt shop less than an hour away and I suggested next Saturday since I know I have that day off, not thinking that it was the day before Easter. Oops, I hope it happens but I understand if it does not.
This means that Saturday was a ton of fun, however I tend to drive myself mad sometimes. In preparation for Saturday (and to just get it done) I worked on getting my third quilt attempt finished. I like how it turned out, learned a lot of lessons, and think I am going to give hand quilting a try next.
Wrestling a quilt that fits the top of a queen sized bed through a domestic sewing machine that sits on one of those small square tables you can get from certain craft stores is NOT how I recommend quilting. It did the job, I have a quilted quilt with the binding sewn on the edges. I did a ‘wavy lines’ quilting pattern, which means I tried to do wavy lines and I’m just going with, “Sure, I wanted it to look like that” as my answer when I am questioned about the weird peaks, dips, and straight edges in my wavy lines. The quilting is about 5″ apart, the batting says that the quilting can be up to 8″ apart so I should be alright there. The binding is just the backing folded over like you would do for pot holders.
Yesterday, Saturday, was a Weaver’s guild meeting half-way between where I used to live and where I live now. I love the guild, and it was ironic that the meeting was held at their public library (where I had interviewed for a job 2 years ago). The meeting was lovely, I had a chance to pull out my spinning wheel and show some individuals how to spin. I also reminded myself how much I enjoy the quiet of spinning. I am presently thinking that I will spin on my front porch while watching the world go by. Of course in order to do this I need to get 2 things accomplished. I need to get the porch level again, it looks as though one board likes to swell in the rain which causes it to buckle the porch, and purchase a chair for my front porch. I have been looking online thinking that I would order one, however if I plan on using it for a spinning chair I really should get a good idea of how it feels before actually spinning in it for any extended length of time. I am hoping that this is a once every 30 years purchase. While in town I discovered that they have a quilt shop which I was thrilled to find out…until I looked at their selection. I know that I have particular tastes, and that I do not want to purchase fabric until I KNOW I like it and will use it. This means that I bought a small, simple, pattern and a bag of essentially colorful scraps and asked the owner to keep the change since that was the only way I could spend five dollars in the shop. I feel bad, but I am not buying fabric I cannot see a good use for. I do have plans to use the pattern as a sort of border for one of the panels I hope to create a quilt from next. I also have 3 jelly rolls, not to mention most of a black jelly roll, to still use. Well, I did not know until I was typing that up that I had really decided on the quilt panel next, however that makes sense. I am still working on my EPP Project.
I have started to figure out how I want to place the glued pieces for my first EPP quilt, I have 10 out of 25 pairs sewn for the second part and these bundles put together for the first part that I hope to start sewing soon. I am trying to get some long languishing projects worked on so that I feel a little more freedom to work on this huge project. I am about a dozen rows away from finishing the pillow that started with a new colorwork class that had me knitting what were almost quilt block pieces. I love how this looks and cannot wait to see it finished. I am a little apprehensive about how I am going to finish it since at present I am planning on knitting some extra rows of the back to create a flap that tucks inside the pillow. I thought about just seaming the pillow blank inside however if I ever need to wash it that would cause too many problems.
Next I hope to start getting projects ready for progress. I need to find a charm pack that will go with the panel I hope to work on so I can get that border started. My 16 shaft loom needs to be warped with the towel warp I wound so I can start weaving that up. I need to straighten out my Saori Loom’s warp so I can get back to using up some of that yarn. There is the possibility that we will be playing with weaving looms next month at the guild meeting so I should have my looms ready to be warped and played with, not to mention possibly finding the alpaca tweed yarn I bought to weave a blanket from. Possibly that got lost during the moth-ening though I hope not. Oh, on a not so fun note, I just realized with spring possibly on the way I should consider putting together the push mower I purchased so that when my lawn dries enough I can mow. yay.
I am honestly excited by all of the changes coming, to myself, my house, and my crafting. I have been finding by leaning into what I am feeling and what my body is trying to tell me I can get more done. Some of this is certainly down to having 1 full-time job, no person needing me to take care of them, as well as having the second house off of my shoulders. However I do believe by resting when I need to, finishing things when I have the urge, and starting (some) things when I also have the urge I am completing more than I ever have in the past. Normally I would have become overwhelmed by the quilt and stopped, instead I leaned into wanting to finish it, took it step by step and leaned into binding when I felt like it instead of waffling.
That is me for the week, it has been busy. I’m going to take the next couple of days to lean into recharging and see where the world takes me from there. I am uncertain if I will post next week, it will depend on how much I get done and how I am feeling. Until next time, Remember to Live Life a Little More Abstract!
So, last Sunday my side hustle was on break and I wound up having a quilting day with an amazing new friend/colleague from my full-time job. The afternoon started off worryingly, I shut the top of my metal storage rack on my finger…that was not a good time to discover I did not have any band-aids in my new house! One trip to the pharmacy later, and I went to my friends house. She is a part of the Pointer Rescue Organization and had a foster dog that I was able to meet. That makes it so hard to remember that I do not have time/space for a dog right now. I was able to get some ideas about how I can/should set up a sewing area. Since she is planning on making a long distance move soon she offered me her folding table…until her husband found out how much it would cost to replace that table, lol. I deeply appreciate the offer, and I do realize that this is the sort of table I am going to need. I gained a deeper understanding of cutting and pressing.
I am having so much fun sewing and quilting right now that I cannot believe I have allowed myself to be intimidated by quilting for this long! The aspects that have allowed me to get into this form of quilting is the understanding that there is more out there than half-square triangles. I am working better when I do not have to meet corners perfectly (though there are certainly arguments that there is no perfect in quilting). I finished a 6 column quilt that comprised of 4 colors in different saturation points that were sashed by black jelly roll strips on all sides. Since this was made of 24 blocks with simple sashing I was able to finish in 2 days. I then made the quilt sandwich, switched out needles when the machine started ka-thunk-ing, and sewed 90% around the edge of the quilt sandwich. Changing the needle once more after the tip broke off at a corner ( digging a sharp needle tip out of quilt batting is not fun). After I cut the excess of batting and backing off of the edges I turned the quilt inside out before I sewed about a quarter inch around the edges to close the seam and get a more finished edge.
The last two steps involved the binding around the edge of the quilt. I sewed the binding strips together, then with the right sides together (with the bulk of the binding on top of the quilt, then once you have sewn around the edge you flip the binding around to the back) I sewed the binding onto the top of the quilt. Next I folded the binding over the edge of the quilt, folded under the edge of the binding and faced hand felling this binding….and I decided to take a shortcut. I decided that I was going to use a decorative stitch from the top of the quilt to machine fell the edges of the binding. In retrospect I really should have at least watched a video on how to machine fell a seam…so after I did that I went back to fell the parts of the seam that did not work, embroidered some text in a corner that the stitching did not work in, and now I’m embroidering a flower on the back so that the embroidery stitches from the text do not show as random thread on the back… Oh well. The batting and backing I used were left over from earlier purchases and I plan on using this as a rug once I have shown it to the quilt guild I joined because my new friend is a member. This experience has also taught me that I need to take some in person classes about quilting, and properly finishing a quilt. Hopefully I can find some that are not cost prohibitive.
One of the main take-aways that I have from this experience is that I really enjoy quilting. For me to do this new craft properly I am going to need a space to create within. My Library room is likely going to become my sewing room. Before I can start using my second and third floors I need my second floor bathroom to be usable, so once the old house has sold this has become my second priority (the roof is still first). I also am going to need a better sewing machine at some point in the relatively near future. I am half thinking about getting a machine that also does embroidery so that I can use the hoop to do some pre-programmed quilting designs on the quilt.
Not everything has been about the quilting however, well there is work and how I will be starting a teen crafting class every week in April but that is a different post, as I have been working with UV resin. UV resin is a form of resin that is quickly set using ultraviolet light, it is said that sunlight works however I have found that UV nail lights work well. The kind that nail salons use to set acrylic nails. I know that this sounds really scary, however with the exception of using mica powder for coloring I have found UV resin to be relatively easy to work with. Small bookmarks turned out well, The medium journal cover needs work, I’m not sure if it is because the mold was not on a flat surface or that the mold warped a little due to the heat of the reaction but this cover is not flat. I’m going to try again with the small cover when the new resin arrives. I am experimenting with different brands of resin to obtain the best value/quality ratio. My boss is already planning on how this can be used at the library, which I am all on board with.
I think that is enough for now, sorry I don’t have any WIP photos.
Okay, sorry it has been a couple of weeks since I have posted on this site. Recently I have volunteered to teach a few crafting classes at the Public Library that I work for. March 9 I will be teaching Crochet, March 23rd I will be teaching a Creative Journal Binding class for teens and up, then on March 30th I will be teaching a Knitting class using the combined continental knitting method that I am familiar with.
Of the three I am most concerned about the knitting class. Apparently there are two methods of knitting, three if you count the combined version, but essentially there is the eastern method and the western method. Most people in America and Europe use the western method. I use a combination of the two, and it works well for me. I enjoy it, though I find Crochet faster, I can do this craft quite well and easily.
Oh well, so I had to work on getting the powerpoint presentations together for them as well as supplies lists and a press release (it only needed minor modifications when I handed it off so that’s great!). For the knit and crochet classes we will be working on creating a washcloth. Not too exciting, but not too complicated either.
The public library will also be offering beginners computer lessons this upcoming week and a week in March in addition to possibly offering other classes (it depends on what the library system decides). In another job I might be teaching a class on Library Research Skills, though I doubt it, but I will have a high-school class to teach the second week in March.
So, even though I have managed to almost spin 1/2 of a Quarter Ounce batt I received in my Phat Fiber box, I don’t have any crafting to post or to speak of. Let me see how March goes, and if I have a few craft posts at once I’ll try to spread them out more!
There are all sorts of interesting crafts out there. Since I am a librarian book binding has fascinated me for years. The intricate work and skills that can go into creating the text blocks of a book, sets of pages, then sewing them together creating the covers and spine, covering the cover and spine…the list does go on. This process also takes several days depending on how intricate you are getting. If you are stretching leather over the cover then there are presses, glues, and a few other things to take into consideration. If this is something that interests you I have gotten supplies from Hollanders and Dick Blick Supplies, also Demco and Gaylord have interesting and fun supplies. The only other thing that they all have in common, it is an expensive hobby to get into. If you are into making paper, art, journaling, writing, or anything like that then creating your own books can be a very worthwhile hobby. I did create my own book at one point, but I cannot find any of the pictures for the life of me.
Japanese Stab Binding, pictured at top, has just a few things in common with traditional binding and a much shorter supplies list. Paper, scrapbooking paper if you want something pretty, awl (or screw punch), ruler, tapestry needle and some kind of thread or yarn. With these few supplies you can easily create a very pretty book. I recommend checking out some of the Stab Binding Videos on YouTube or searching for Japanese Stab Binding on Pinterest.