Dyeing with Depth

I am having so much fun with dying techniques!  These are my first  4 attempts at dyeing with depth, using more than one color before putting in my main color so that the main color stands out more than it would have.  The first two braids, that I think of as Crows and Ravens are red & blue with black as the main color.  The reds and blues struck the fiber more than I thought they would leaving little room for the black to attach, I think I will have to use less of the first two and perhaps a professional black if I want to try this again.  The yellow is a light yellow overdyed with a stronger golden yellow.  I like the effect, it gives the yellows some depth without muddying things up too much.  The reds were an interesting experiment, between my cake frosting dyes, and my regular dyes I had about 3-4 shades of red/pink.  So I used all of them, the end result was supposed to be a strong red with pink undertones/depth.  Things didn’t seem to be working too well until I remembered a piece of advice where they said to use a contrasting color to emphasize the main color, so with a hope and a prayer I put in a drop of blue.  Much to my shock the red started to pop and the overall effect is that the colors deepened quite a bit.

I am very happy with these results and look forward to my next dyeing day!

Happy Crafting!

Dyeing For Color

img_1177

I have to confess, this wool is so much softer than it looks.  All of these pieces of wool are dyed using either Liquid or gel food dyes as well as a combination of Alum and Cream of Tartar as a mordant.  I do enjoy how the colors have turned out, they are not as brilliant as I would have liked.  I did find out with the last batch of yellow I did, if I pre-mordant the fiber and cook up the dye bath in the mordant and use about half a container of the color then the colors come out very rich, the bottom two golden yellows.  The yellow right above was first dyed in Hibiscus Tea (a variety that was quite sharp though I usually prefer hibiscus tea).  This particular blend of tea is a very sharp red and initially turned the fiber a beautiful Burgundy…alas all of that color just ran right out of the fiber when it was taken from the bath.  The result was a very faintly beige color, you know that shade of eggshell where you are staring at it and saying “it isn’t quite white but it isn’t really anything else either.”  So I overdyed by plopping this fiber into a pot that I thought was exhausted (it wasn’t) and turned out to be very pretty and rinsed clear.

I am really happy with my experimentations.  If I get particularly brave this afternoon I might try to fill out cards with what information I have for them and start a dye dairy.  At the absolute minimum I intend to finish dyeing my fibers using the Wilton Cake Dye kit I obtained and Alum Mordant so that I have a wide Pallette of colors to play with.  If sometime this summer a yen takes my fancy I might look into obtaining some Jacquard dyes to get more colors.  I do hope to spend some time this summer and fall experimenting with plant materials and the dyes that they can create, how exciting!

Happy Crafting!

Dying Experiments Continue

I am not sure what is wrong with my water/wool/microwave but the methods that everyone else swears by don’t work for me.  During the summer I used Kool-Aid to dye some fiber.  Everyone swore that you had to use heat to set the color (which makes ice dying very confusing to me…), however I rinsed my fiber extremely well and have had no problems with the color running.  With my Drum Carder coming soon I dug up some left over white fiber and decided to pick up some dyes to experiment with.  There was a Black dye calling my name so I purchased it in addition to the same food coloring dyes I usually use.  (I do plan on getting some Wilton Dyes soon).

I went through my method of soaking the wool in hot water and vinegar.  The wool is wrung out, the water dumped from the bowl, the fiber put back in.  Next the dye, more vinegar and very hot water are added.  The wool is left to soak up as much dye as it can.

IMG_2161.JPG

In this case I decided to microwave the fiber for the five minutes recommended, however the fiber began to boil before it was well into the third minute, when it began to splatter in my microwave I decided to discontinue the experiment and pull the fiber.  After it cooled down and took as much dye as it seemed it would I rinsed the fiber, and rinsed the fiber, and rinsed the fiber.  After a great many rinses the dye stopped coming out and the results were…well disappointing.

IMG_0990.JPG

The coiled Brown/Purplish things at the top right are my ‘black’ fiber.  Oh well, the fibers that I overdyed with Yellow are beautiful, since I skipped the microwave the colors seem more vibrant.  The multi-colored batt at the top left should make a beautiful base for my first ‘official batt’ and I am very excited.  That piece was hemorrhaging dye until I soaked it with some pure vinegar, after that the color decided to stay put.

I am positive that most people have great success cooking/boiling/steaming their fiber.  I am certain that they have tried these methods without the heat and have had the fiber return to white, retaining little to no dye, (still can’t understand how they ‘need’ heat when they dye with ice cubes, have to research that more).  My experiments have lead me down a slightly different path.  Perhaps when I wash a finished piece, not finished yarn I’ve done that with no color leaking, my experience will be different, but for right now, when I’m dying with those little bottles of ‘easter egg’ dye, I’m not going to use any extra heat.  Perhaps a bit more vinegar, but I’ll use hot water and vinegar to see how things turn out.

When I move onto ‘professional dyes’, RIT, Wilton Gel, I will revise my experiments.  Until then;

Happy Crafting!

Christmas Presents

I have ordered a Brother Drum Carder for myself for Christmas.  (mom is getting a set of stacking boxes with clear doors for her yarn stash, shhhh don’t tell her).  The Drum carder I have ordered will have 90 tpi, suitable for carding finer wools without damaging them yet coarse enough that I can card almost anything else I desire.  In an effort to get into the carding spirit I also ordered a pound of undyed wool.  I have played with Kool-Aid Dye in the past, causing the co-president of my guild to think I only like primary pinks and blues, but I have been hearing a lot about dying wool with Wilton and Rit Dyes.  Due to this desire to experiment, I am doing some research about other peoples experiments with this dye.

The first mentioned Rit dye and a few ‘glugs’ of vinegar.  Her experiment went well!

Love Knitting has an article about Wilton Food Dyes; Start by soaking the fiber in a vinegar bath, 1/4 cup to about 4 oz of fiber, for at least 20 minutes.  Pour the fiber, vinegar, another 1/4 cup of vinegar into a pot.  Add the color a tiny bit at a time and agitate to disperse the dye.  Start on low and heat up your pot of fiber, when it is at a simmer just before boiling take it off of the stove and let it cool down.  Rinse with lukewarm water until the water runs clear, then hang up to dry.  There are also some tips about painting yarn, I particularly find it interesting that sponges (along with a vinegar dye mix) can be used to paint the yarn/fiber to create gradients and variations.  Heat is still needed to set the fiber, so the author steamed the yarn for about 40 minutes in a steamer basket.  Though they mentioned that it is possible to microwave for 1-2 minute bursts for about 5 minutes to set the yarn.

Both the RIT Dye site and Wilton Food Site have information on how to use their dyes for coloring different materials.  I cannot wait to begin experimentation!

Happy Crafting!

Kool Aid Dying Part 2

I had an absolute blast dying some Merino that I picked up earlier this year.  I am trying to gear up for Spinzilla this October, in preparation I decided I wanted to spin my own Colorways.  To spin my own colors then I need to generate them, starting with dying the fiber.  To dye these fibers I soaked the batches of fiber in water for at least 5 minutes, usually longer.  Once they were saturated I wrung them out.  While they were soaking I mixed up some kool-aid in the color I was looking for.  In the case of Yellow I added in some food coloring left over from Easter.  I will admit that I added in a glug or two of white vinegar to each of the baths in an effort to maximize the dye absorption.

It was so much fun to set up a few batches on my bathroom sink then go to work or to bed and come back to find the fiber a beautiful color and the water clear or almost clear.  Every single time it looked a bit like a miracle.

I had no problems with felting so I plan to spin up the multi-hued batt I created straight from the combed top.  The rest of the hues will be blended with different fibers, some silk, some other materials, to create rolags or mini batts to be spun up for Spinzilla!

By my calculations I have about a month to get this fiber carded and prepped for spinning!

Happy Crafting!

Dying to get started

These are the results of my Kool-Aid experiment.  They were created from the wool I had received with my Schacht Wheel (I’m not really sure what it is).  A very pretty wool that did not felt on me when I tried this!  I put 3 Kool-Aid lemonaid packets into a plastic shoe box with about 2-4 oz of wool (I do not have a kitchen scale so it is all estimated).  I then poured enough water to cover the wool and added about 10 drops of food coloring.  The resulting fiber was the fire orange color.  After letting it set for about 30 minutes I took it out and began to rinse the fiber.  A lot of the dye started to come out of the fiber as I was rinsing.  Since I feared losing the beautiful color I decided to use some vinegar to soak the fiber and retain the color, after a 15 minute soak and a thorough rinsing the color remained and the fiber didn’t even have a vinegar stink.

There was a lot of dye left in the water so I decided to throw more fiber into it, again somewhere between 2-4 oz of wool, and another packet of lemonaid kool-aid to help things set.  It soaked for about 30 minutes and when rinsed created the beautiful yellow that can be found in both skeins.

I think that kool-aid (helped along with some food coloring if needed) is a great introductory method to dying.  I look forward to more experiments in the future, but some fiber is calling my name to be spun!

Happy Crafting!